Yeedercar Custom Carbon Fiber Side Panel for Kawasaki Custom

A lighter replacement for the standard side panel on the Kawasaki Custom, with the mounting lugs moulded in.

Layered from 3K 2×2 twill and cured under vacuum in our own autoclave, so the resin-to-fiber ratio stays consistent from part to part.

Unbolt the original panel, transfer the grommets and rubbers, and refit – about 20-30 minutes per side.

Fits: Kawasaki Custom

Fixing points match the original panel of the Kawasaki Custom, including the frame grommets.

Seat and tank shapes change between model years – confirm the year range matches your bike.

Weave, weave direction and clear-coat finish are all selected at order time, and the panel can be laid up in forged carbon or twill to match the rest of the bike.

• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)

A ceramic or wax coat once a season is all this needs – the clear coat handles UV, but it is not a scratch-proof layer.

Quality control is a visual inspection plus a fit check on the master jig; anything with a lifted clear coat or a distorted mounting edge is rejected rather than shipped and discounted.

Because the tooling is in-house, changes that a trader would refuse – a different weave, a logo under the clear coat, a slight trim to clear a roll cage – are normal work for us.

One piece is fine for a first sample – there is no minimum order. When you need volume, the same mould runs batches of 50, 200 or 1,000+ pieces.

Allow 10-15 business days for production plus transit time; express DHL, UPS and FedEx options are available at checkout, and the part carries a 12-month warranty against manufacturing defects.

In the box: side panel and a fitting card.