Carbon Fiber Mirror Caps for BMW 5 Series GT F07

These mirror caps for the BMW 5 Series GT F07, produced to order rather than pulled off a shelf and shaped to the factory housing.

Fitment: BMW 5 Series GT F07

At a glance: Material — Carbon Fiber · Finish — Matte · Fixings — Pre-applied 3M tape · Production — 10-15 Business Days · Warranty — 12 Months · Shipping — worldwide tracked (DHL / UPS / FedEx / 4PX)

The pair goes on in an afternoon on the BMW 5 Series GT F07, so the car can be returned to standard later. Give the surface a proper degrease and hold each cover for thirty seconds. Dust under the tape is the usual cause of an edge lifting later.

Shipped as matte. Tinted clear coats and logo work under the lacquer are possible on the same order.

A pair like this is one of the few modifications on a BMW 5 Series GT F07 that survives a resale inspection, since nothing structural is touched.

The cartons are double-walled for export — the shells are light, but the clear coat is what suffers if they are packed loose. Transit damage is replaced as soon as we see a photo.

There is nothing fussy about the upkeep; a wax or ceramic topper once or twice a year is enough. Avoid pressure-washing directly at the seam where the cover meets the housing.

We supply workshops, tuners and distributors direct from our Foshan plant, which is why quantity pricing starts at sample level, with production then running in 20-35 day batches.

The tooling is made from a scan of the original part, which keeps the edge line identical to the original. The paint underneath stays untouched.

We run carbon fiber for the outer skin, cured under vacuum so the resin-to-weave ratio stays consistent. Weave direction is matched left to right, which two covers bought separately rarely achieve.