BMW E92 M3 Carbon Fiber Mirror Caps — Gloss Finish, Fits Factory Mounts

Direct-fit mirror caps for the BMW E92 M3, produced to order rather than pulled off a shelf with the mounting points taken from the original part.

Fitment: BMW E92 M3

At a glance: Material — Carbon Fiber · Finish — Gloss · Fixings — Pre-applied 3M tape · Production — 10-15 Business Days · Warranty — 12 Months · Shipping — worldwide tracked (DHL / UPS / FedEx / 4PX)

The job is fully reversible at the mirror housing itself, and the original clips are the only fragile part. Give the surface a proper degrease so the tape has a clean surface to key to. A hair dryer helps in cold weather.

The default clear coat is gloss. If you are matching an interior or a wrap, tell us and we confirm the clear coat before production starts.

Detailers usually ask us for a set with the weave rotated to match the bonnet vents; it is a small thing that reads well in close-up photos.

Each pair is packed with foam wrap and corner protection, with tracking on every shipment. We have shipped this part family to more than thirty countries.

Keeping them clean is easy, and a rinse after winter salt pays for itself. Avoid abrasive polishes — the clear coat handles UV and road salt, it is not a scratch-proof layer.

Dealers and tuners can order under their own label — the tooling is the only fixed cost and it is amortised across the batch. Body shops ordering for insurance repairs can be invoiced per job.

Every pair is checked against the OE part, so the cover seats the way the factory part does. The paint underneath stays untouched.

The outer shell is carbon fiber, then clear coated and buffed flat. The panel stays thin enough to keep the original silhouette.